Arnold Schwarzenegger losing to Sergio Oliva at the 1969 Mr. Olympia

in Bodybuilding Science

Rest-Pause: Can You Really Build Muscle Faster With This Tip From the Only Bodybuilder to Ever Beat Arnold Schwarzenegger?

A practical, science-based guide to building muscle faster with rest-pause sets

In 1962, Cuban weightlifter Sergio Oliva received political asylum in America. In 1969, he would become the first (and only) bodybuilder to ever beat Arnold Schwarzenegger at the Mr. Olympia.

Sergio Oliva is the only bodybuilder to ever beat Arnold Schwarzenegger at the Mr. Olympia

Sergio Oliva is the only bodybuilder to ever beat Arnold Schwarzenegger at the Mr. Olympia

Schwarzenegger later recounted:

“Then for the first time, I saw Sergio Oliva in person. I understood why they called him ‘the Myth’. It was as jarring as if I’d walked into a wall. He destroyed me. He was so huge, he was so fantastic, there was no way I could even think of beating him.” –Arnold Schwarzenegger in Arnold: The Education of a Bodybuilder (1977)

In 1984, a reporter for MuscleMag spent 3 days in Chicago with Oliva. He noted:

I would estimate that Sergio used rest-pause on 90 per cent of his exercises. On all upper body exercises Sergio used the rest-pause principle on just about every exercise and every set. –Greg Zulak for

Sergio Oliva used rest-pause on 90% of his exercises

Sergio Oliva used rest-pause on 90% of his exercises

So, what are rest-pause sets? And how could you use them to build muscle faster? You’ll find out in this guide.

According to Men’s Journal, “Rest-pause is an old-school bodybuilding technique of performing a set to failure, resting a few seconds, then squeezing out more reps.”

Muscle & Strength traces rest-pause back to the 60’s and reports that Arnold Schwarzenegger and Mike Mentzer both used it.

Since then, exercise scientists have started to study rest-pause, and their results are fascinating.

Recently, Prestes et al. (2017) carried out a training experiment using rest-pause.

In their study, one group of lifters trained using a single rest-pause set. Another group trained using 3 normal sets.

After 6 weeks of training, lifters who used rest-pause gained more muscle thickness in the thigh (11%) than those who used normal sets (1%). However, their arms and chest did not grow faster. Still, these results suggest that rest-pause works well to build muscle. And here’s the kicker: this technique can cut your training time in half, because you’re not “wasting” any time resting between sets.

In fact, using rest-pause, the science suggests you could build muscle just as fast with 1 set than you would with 3 normal sets.

How to Do Rest-pause Sets to Build Muscle Just as Fast With 1 Set Than You Would With 3 Normal Sets

In their study, Prestes et al. (2017) defined rest-pause sets this way:

“An initial set with 80% of 1RM until failure with subsequent sets performed with a 20-second inter-set rest interval until completing a total of 18 repetitions.”

If you’re not familiar with exercise science lingo, this might need a little explaining:

Your 1RM (one-rep max) is the max weight you can lift once for an exercise; 80% of your 1RM is usually 8 reps. So, if you were to train using rest-pause like the lifters in that study, you would do:

  • 8 reps
  • 20 seconds of rest
  • As many reps as you can with good form (say, 4 reps)
  • 20 seconds of rest
  • As many reps as you can with good form (say, 3 reps)
  • 20 seconds of rest
  • As many reps as you can with good form (say, 3 reps)

And you’d be done!

This counts as 1 rest-pause set of 18 reps and Prestes et al. (2017) have found it leads to similar or better gains than 3 normal sets (of 6 reps each).

On a personal note, I’ve been training with rest-pause since September 2017. I’m seeing similar gains with shorter workouts, and I don’t think I’ll ever go back.

I’m also coaching a small group of forward-thinking lifters. Many have been testing rest-pause, and they also report similar gains in about half the time. In fact, rest-pause works so well, I’ve decided to make it my default training technique. But with a twist, to make it safer and (perhaps) even more effective.

The Problem With Rest-Pause

If you were to train using rest-pause all the time as defined by most old-school bodybuilders and Prestes et al. (2017), you might end up overtrained or injured. Why?

Because you would be training to failure. A lot. On every set. Of every exercise. And more! Because you would be reaching failure multiples times at the end of every set.

All this training to failure is taxing, and many coaches believe that you risk overtraining and even injuring yourself if you push rest-pause for too long. But there’s a way to avoid that.

Train With Rest-pause Not to Failure

Ta-da! While most people equate rest-pause with training to failure, you can also train efficiently not to failure with it.

You would accomplish that by doing, say, 8 reps with a weight you could lift a maximum of 10 times. By doing so, you’re keeping 2 reps “in reserve”, and you’re not training to failure on your initial set. Similarly, after each pause, you would do a few more reps, while still keeping 2 reps in reserve.

By training that way, I bet that you can still build muscle just as fast with 1 set than you would with 3 normal sets, all the while avoiding overtraining and injury. Before I show you how that looks like with an example, I’ll add one final twist I learned from experience using rest-pause. It has to do with how long you rest during each pause.

Rest-pause: 20, 30, or 40 seconds of rest?

I first started to experiment with rest-pause after reading the Prestes et al. (2017) study. In that study, each pause is 20 seconds.

I quickly found that 20 seconds wasn’t enough of rest to perform more than 1 or 2 extra reps on heavy compound lifts like the squat and the deadlift. So, I started resting 40 seconds during pauses, and I advised my clients to do the same. That way, we were able to do 3-4 extra reps after every pause, and that seemed better to me.

However, after having trained with that technique for a few months now, I’ve found that I’ve adapted to it (like most things exercise). These days, I rest 25 seconds, and I’m still able to squeeze out about 3 extra reps on the squat. Also, 25 seconds is closer to the 20 seconds used by Prestes et al. (2017), and it’s more efficient. If I can get similar results in less time, I’m happy. Many of my clients think that way, too.

So, my simplest recommendation would be to rest 25 seconds. Better yet, if you’re new to rest-pause, start with 40 seconds, and lower that by 5 seconds every month until you’re at 25 seconds. Like this:

  • First month of using rest-pause: 40 seconds of rest
  • Second month of using rest-pause: 35 seconds of rest
  • Third month of using rest-pause: 30 seconds of rest
  • Fourth month of using rest-pause: 25 seconds of rest

Rest-Pause With Varying Number of Reps

Prestes et al. (2017) used rest-pause with a first set of 8 reps, adding pauses until a total of 18 reps were performed. But you don’t have to do your rest-pauses that way.

In fact, the science shows that you get stronger faster is you vary your reps often. On that topic, Nuckols (2018) found that periodized training lead to larger strength gains. He concluded that “It’s probably wise to incorporate some undulations into trained lifters’ programs.” By “undulations”, he means changing reps, as in daily undulating periodization.

So, bottom line, varying your reps often is a good idea, and a simple rule of thumb I’m using with my clients is to double your daily rep target using pauses. So, for example, if you’re doing 12 reps today, you would do:

  • 12 reps
  • 25 seconds of rest
  • As many reps as you can with good form (say, 4 reps)
  • 25 seconds of rest
  • As many reps as you can with good form (say, 4 reps)
  • 25 seconds of rest
  • As many reps as you can with good form (say, 4 reps)

Making Progress with Rest-Pause

The key to building muscle and strength over time is progression. To get bigger and stronger, you gotta make progress.

You can do that efficiently by doing more and more pauses. Like this:

  • Week 1: 1 pause (squeezing out 3-5 extra reps)
  • Week 2: 2 pauses (squeezing out 6-10 extra reps)
  • Week 3: 3 pauses (squeezing out 9-15 extra reps)

And so on… Catch my drift?

Rest-pause is an efficient way to add volume and progress in your training without spending hours lifting weights.

Recovering From Rest-Pause

Rest-pause can be taxing, especially if you carry it out to failure. To avoid overtraining with rest-pause, I recommend you keep an eye on your performance. If you stop making progress, or if your weights or reps go down, you may be overtraining.

When that happens, an easy way to recover is to stop using rest-pause for 2 weeks. During those 2 weks, do just one normal sets for every exercise in your program, keeping 4 reps in reserve on all your sets. After 2 weeks, you should be ready to roar back into training, and to start adding pauses gradually.

Are Rest-Pause Reps More Effective at Building Muscle?

Rest-pause is more efficient, because it gives you the same results in half the time. But could it also be more effective?

Prestes et al. (2017) did find that that lifters who used rest-pause did gain more muscle thickness in the thigh (11%) than those who used normal sets (1%). Another study on drop sets found that 1 drop set was just as (or more) effective than 3 normal sets (Fink et al. 2017). Why would rest-pause and drop sets be more effective?

In another article, I hypothesized that reps closer to failure may be more effective because they create more metabolic stress. With rest-pause and drop sets, more reps are performed closer to failure. So, I hypothesized they are more effective.

Since publishing that article, I’ve had the opportunity to discuss this idea with some of the best minds in our field, and I realise that it’s too early to conclude with confidence that rest-pause reps are more effective at building muscle. We need more data.

Even so, if these reps are more effective, the difference is likely to be small. The main drivers of hypertrophy are still tension and volume, and to get bigger over time, you should still focus on lifting heavier and lifting more.

How Do You Count Rest-Pause Sets?

Some lifters like to count their sets, to make sure they’re increasing their volume over time (it’s a great way to progress your training for size).

So, I get asked questions like:

Is there a rule of thumb that you would you use for volume-equating rest-pause sets to straight sets?

To answer, here’s a somewhat typical rest-pause set:

  • 10 reps (activation set)
  • 3 reps (mini set)
  • 3 reps (mini set)
  • 2 reps (mini set)
  • 2 reps (mini set)

To me, that’s like 3 normal sets, because:

  • Activation set = 1 normal set
  • 3 reps + 3 reps = 2nd normal set
  • 2 reps + 2 reps = 3rd normal set

So, the rule of thumb is:

  • 1 activation set = 1 normal set
  • 2 mini sets = 1 normal set

Now, there’s no hard science behind this. So, to be clear: it’s just my best guess based on 18 years of experience.

Learn More About Rest-Pause and Muscle Hypertrophy (Podcasts and Interviews)

If you’d like to learn more, you may be interested in my interviews with:

  1. Danny Lennon of Sigma Nutrition (Effective Reps & Strategies for Hypertrophy
  2. Steve Hall of Revive Stronger (The Science of Effective Reps and Rest-Pause Sets):

  3. Juma Iraki​ of Iraki Nutrition (Simple Periodization For Muscle Hypertrophy):

Wrapping Up: Why Aren’t More People Using Rest-Pause?

I wonder why not more people are using rest-pause. Especially since this technique has been around for so long. It’s just as effective at building muscle as normal sets, and it takes only about half the time. Many people say they don’t have time to train. They should use rest-pause.

Honestly, why train the old way? In publishing this guide, my hope is that rest-pause becomes more popular, so more people can look and feel their best.

Automate Your Training With Rest-Pause

Rest-pause, periodization, and other advanced strategies help you build muscle faster, but they can be confusing to implement, especially if you’re new to lifting weights. Heck, I’ve been a coach and a lifter for 17 years, I got a PhD in that stuff, and I have to sit down and think through all of this carefully before I write a good training program.

That’s why I’m building Dr. Muscle. Dr. Muscle is a new phone app that helps you build muscle faster with a smart program that levels up automatically. It updates every time you work out with the optimal reps and sets for you, so you always build muscle as fast as possible. It’s like a world-class personal trainer in your phone, but 10 times cheaper, always up to date, and available 24/7. And now, it automates rest-pause.

It’s in early access right now, and since you’ve read this far, I’d be honoured if you gave it a shot. Click here to get access (1st month free). I love getting feedback: email me or drop me a line on Facebook if you have any.

Write a Comment



  1. Hi, I have a question….. In rest pause techniques, there are two types which are bulldozer and block training….. So, in your opinion should I implement those 2 together to have a greater results since both methods just consume a bit of time.

  2. Yes, I’ve done and still do rest pause. Much better then doing straight sets or pyramid sets which I’ve tried but my best results came from rest pause. I did them similar to you. For chest as an example, I’d do a few ramp sets up to my working weight and go for 10-12 reps to near failure (stopping a rep or 2 shy of failure) then I’d rest for no longer than a minute then do the next rest pause set for around 8 reps. Rest for 1 min again then do as many reps as possible, say 5-6 on the last set. Sometimes on the last rest pause set I may drop the weight a little just to get a little more reps as my body responds bets to higher reps. Example

    First set 12 reps
    Rest 60 seconds
    Second set 8 reps
    Rest 60 seconds
    Drop weight by 10 %
    Third set 8 reps

    But I only do that if I feel the need. This way of training works in any rep range. I tend to like a bit longer on the rest period, no longer than 60 seconds as I can get out more reps that way depending on the rep range I’m doing. As you say I only go to near failure, not total failure as this would be too much for drug free trainers. Stopping 1-2 reps shy of failure is still training hard, just not crazy hard.

    • Hi Mark,

      Great comment. One small thing I’d look out for: the research suggests rests of 20 secs work best. So I’d rest just 20 secs and do fewer reps after each pause.



  3. I have a question. Let’s say I did rest pause for isolation movements for each muscle and that too as a finisher. How should I do when I deload after 4th or 6th week?

  4. Hi, I’m very new on weightlifting. But since I get started I really get interested on strength training. Are the rest pause system efficient if I want to get stronger?? (I’m using the Dr.Muscle app and is incredible)

    • Glad you like the app José. Yes, rest-pause is efficient to get stronger. It’s somewhat less effective than normal sets though, so if you have more time and your #1 goal is to get strong, I’d suggest normal sets. You can turn those on in Dr. Muscle under “settings”. Good luck!

  5. Dr. Juneau I was wondering about a situation if you might be stalled on adding an extra rep to your set. If you rested for enough seconds to add that one more rep and then over time decreased the rest time till you could do that rep without rest. Do you think this would be an effective form of progression? What are your thoughts and recommendations?